Besides the window, we put the television there with the chest of the drawer under it. Choose the medium size for put the chest of the drawer there. Because we know that, this is are the limited space. But, don’t worry we could still feel the comfortable sense here. In front of your television, we put the big and wide sofa there. We using the grey color which is the lowest lever of grey color. This sofa are similar with your bed, so it would feel like you are in your bedroom.
For the using of white color, we apply to the wall painting for the basic color. And at the other side of the wall, we add the window there to shine your room more warm and bright. Important to have the ventilation. The window that we made are using the white color painting and we use the brown color for the curtain but not transparent curtain. There, in front of the wall we put the plant pot there to make your living room have the effect of nature.
Because this is are the narrow space, we have our special design plan for make it. First, we talked about the main color that we use to this living room. We using the calm color painting, because by using this color we could add the other color and it would show clearly. The calm color that we use are the white color and grey color . Each color using for several part of this living room and sometimes we use with the different level of each color. The contemporary look design sofa furniture are the theme that we want to use at this case.
Before proceeding too much farther into the remaining steps, it’s first necessary to confirm that the material in question is actually a solid piece of wood, and not a man-made composite or piece of plastic made to imitate wood. Can you see the end-grain? Manufactured wood such as MDF, OSB, and particleboard all have a distinct look that is—in nearly all cases—easily distinguishable from the endgrain of real wood. Look for growth rings—formed by the yearly growth of a tree—which will be a dead-giveaway that the wood sample in question is a solid, genuine chunk of wood taken from a tree. Is it veneered? If you see a large panel that has a repeating grain pattern, it may be a veneer. In such cases, a very thin layer of real wood is peeled from a tree and attached to a substrate; sometimes the veneer can be one continuous repeating piece because it is rotary-sliced to shave off the veneer layer as the tree trunk is spun by machines.
Obviously softwoods will tend to be softer than hardwoods, but try to get a sense of how it compares to other known woods. Density and hardness are closely related, so if the wood is heavy, it will most likely be hard too. If the wood is a part of a finished item that you can’t adequately weigh, you might be able to test the hardness by gouging it in an inconspicuous area. Also, if it is used in a piece of furniture, such as a tabletop, a general idea of its hardness can be assessed by the number and depth of the gouges/dings in the piece given its age and use. A tabletop made of pine will have much deeper dents than a tabletop made of Oak. Additionally, you can always try the “fingernail test” as a rough hardness indicator: find a crisp edge of the wood, and with your fingernail try to push in as hard as you can and see if you’re able to make a dent in the wood.
Zhaorentouzi is the go-to destination for anyone who is passionate about design, architecture, luxury, lifestyle and creativity in the home. Those who visit the site are seeking inspiration to help them on their journey to creating their dream home as well as practical solutions to the problems that their homes may present. And don’t forget to follow us on gplus and like us on Facebook as that’s where the real conversation takes place. We’re waiting to hear from you!
© 2005-2018 zhaorentouzi. Reproduction without explicit permission is prohibited. All Rights Reserved.